dmesg - GeForce GTX 680
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dd71dfff] usable
BIOS-e820: [mem 0x00000000dd71e000-0x00000000dd770fff] ACPI NVS
BIOS-e820: [mem 0x00000000dd771000-0x00000000dd779fff] ACPI data
BIOS-e820: [mem 0x00000000dd77a000-0x00000000ddad8fff] reserved
BIOS-e820: [mem 0x00000000ddad9000-0x00000000ddae9fff] ACPI NVS
BIOS-e820: [mem 0x00000000ddaea000-0x00000000ddafefff] reserved
BIOS-e820: [mem 0x00000000ddaff000-0x00000000ddb00fff] ACPI NVS
BIOS-e820: [mem 0x00000000ddb01000-0x00000000ddb09fff] reserved
BIOS-e820: [mem 0x00000000ddb0a000-0x00000000ddb0ffff] ACPI NVS
BIOS-e820: [mem 0x00000000ddb10000-0x00000000ddb70fff] reserved
BIOS-e820: [mem 0x00000000ddb71000-0x00000000ddd73fff] ACPI NVS
BIOS-e820: [mem 0x00000000ddd74000-0x00000000ddefffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000021effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./Crosshair V Formula, BIOS 1503 06/27/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-D6FFF write-protect
D7000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DDF00000 mask FFFFFFF00000 uncachable
4 base 0000DE000000 mask FFFFFE000000 uncachable
5 disabled
6 disabled
7 disabled
TOM2: 000000021f000000 aka 8688M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3551MB, range: 1MB, type UC
reg 4, base: 3552MB, range: 32MB, type UC
total RAM covered: 3551M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3551MB, range: 1MB, type UC
reg 2, base: 3552MB, range: 32MB, type UC
reg 3, base: 3584MB, range: 512MB, type UC
e820: update [mem 0xddf00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xddf00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[mem 0x21ee00000-0x21effffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21edfffff]
[mem 0x21c000000-0x21edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdd71dfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xdd5fffff] page 2M
[mem 0xdd600000-0xdd71dfff] page 4k
init_memory_mapping: [mem 0xddd74000-0xddefffff]
[mem 0xddd74000-0xddefffff] page 4k
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35eee000-0x36f6efff]
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000dd771068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000dd778330 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130517/tbfadt-603)
ACPI: DSDT 00000000dd771140 071EC (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000ddb0af80 00040
ACPI: APIC 00000000dd778428 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000dd7784c8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000dd778508 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
ACPI: SSDT 00000000dd778540 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021effffff]
Initmem setup node 0 [mem 0x00000000-0x21effffff]
NODE_DATA [mem 0x21eff7000-0x21effbfff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216600000-ffff88021e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xdd71dfff]
node 0: [mem 0xddd74000-0xddefffff]
node 0: [mem 0x100001000-0x21effffff]
On node 0 totalpages: 2082885
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14115 pages used for memmap
DMA32 zone: 903338 pages, LIFO batch:31
Normal zone: 18368 pages used for memmap
Normal zone: 1175551 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdd71e000-0xdd770fff]
PM: Registered nosave memory: [mem 0xdd771000-0xdd779fff]
PM: Registered nosave memory: [mem 0xdd77a000-0xddad8fff]
PM: Registered nosave memory: [mem 0xddad9000-0xddae9fff]
PM: Registered nosave memory: [mem 0xddaea000-0xddafefff]
PM: Registered nosave memory: [mem 0xddaff000-0xddb00fff]
PM: Registered nosave memory: [mem 0xddb01000-0xddb09fff]
PM: Registered nosave memory: [mem 0xddb0a000-0xddb0ffff]
PM: Registered nosave memory: [mem 0xddb10000-0xddb70fff]
PM: Registered nosave memory: [mem 0xddb71000-0xddd73fff]
PM: Registered nosave memory: [mem 0xddf00000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xddf00000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88021ec00000 s86720 r8192 d23872 u262144
pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2050317
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ d4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ d4000000
PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
Memory: 8034460K/8331540K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 297080K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:1288 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4013.359 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8026.71 BogoMIPS (lpj=16053436)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00ddf00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27796 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (64213.74 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdd71e000-0xdd770fff] (339968 bytes)
PM: Registering ACPI NVS region [mem 0xddad9000-0xddae9fff] (69632 bytes)
PM: Registering ACPI NVS region [mem 0xddaff000-0xddb00fff] (8192 bytes)
PM: Registering ACPI NVS region [mem 0xddb0a000-0xddb0ffff] (24576 bytes)
PM: Registering ACPI NVS region [mem 0xddb71000-0xddd73fff] (2109440 bytes)
regulator-dummy: no parameters
RTC time: 13:01:11, date: 11/07/13
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe60b000-0xfe60b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe60a000-0xfe60afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe609000-0xfe6090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe608000-0xfe608fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe607000-0xfe6070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe600000-0xfe603fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe606000-0xfe606fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe605000-0xfe605fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe604000-0xfe6040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:1180] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:02:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:02:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:02:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:02:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:02:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:02:00.0: reg 0x24: [mem 0xfe500000-0xfe5001ff]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:03:00.0: [8086:150c] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfe400000-0xfe41ffff]
pci 0000:03:00.0: reg 0x18: [io 0xc000-0xc01f]
pci 0000:03:00.0: reg 0x1c: [mem 0xfe420000-0xfe423fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfe200000-0xfe207fff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:07.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfe100000-0xfe107fff 64bit]
pci 0000:06:00.0: PME# supported from D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 06]
pci 0000:00:09.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xdd71e000-0xdfffffff]
e820: reserve RAM buffer [mem 0xddf00000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x02af] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:07.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:09.0: PCI bridge to [bus 06]
pci 0000:00:09.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:14.4: PCI bridge to [bus 07]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:04: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:05: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:06: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x03af]
pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:07: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:07: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:07: resource 10 [mem 0xe0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16900K (ffff880035eee000 - ffff880036f6f000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ d4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1383829272.528:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15854
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe609000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 21, io mem 0xfe607000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 23, io mem 0xfe604000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:04:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb4: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb5: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:05:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 84 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 85 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 86 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 87 for MSI/MSI-X
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb6: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 7
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb7: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:06:00.0: irq 88 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 89 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 90 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 91 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 92 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 93 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 94 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 95 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb8: SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb9: SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 5:894:27
memory memory67: hash matches
rtc_cmos 00:04: setting system clock to 2013-11-07 13:01:13 UTC (1383829273)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
systemd-udevd[144]: starting version 204
libahci: module verification failed: signature and/or required key missing - tainting kernel
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b380 irq 19
ahci 0000:02:00.0: irq 96 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfe500000 port 0xfe500100 irq 96
ata8: SATA max UDMA/133 abar m512@0xfe500000 port 0xfe500180 irq 96
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:03:00.0: Disabling ASPM L0s
e1000e 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:03:00.0: irq 97 for MSI/MSI-X
e1000e 0000:03:00.0 eth0: registered PHC clock
e1000e 0000:03:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 14:da:e9:0e:7c:24
e1000e 0000:03:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:03:00.0 eth0: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-8: OCZ-AGILITY, 1.5, max UDMA/133
ata7.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA OCZ-AGILITY 1.5 PQ: 0 ANSI: 5
sd 6:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 6:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 6:0:0:0: [sda] Attached SCSI disk
ata8: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
tsc: Refined TSC clocksource calibration: 4013.499 MHz
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 8330236k swap on /dev/sda5. Priority:-1 extents:1 across:8330236k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[340]: starting version 204
lp: driver loaded but no devices found
wmi: Mapper loaded
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 10
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe60a000
[drm] Initialized drm 1.1.0 20060810
MCE: In-kernel MCE decoding enabled.
type=1400 audit(1383829274.945:2): apparmor="STATUS" operation="profile_load" parent=389 profile="unconfined" name="/sbin/dhclient" pid=396 comm="apparmor_parser"
type=1400 audit(1383829274.945:3): apparmor="STATUS" operation="profile_load" parent=389 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=396 comm="apparmor_parser"
type=1400 audit(1383829274.945:4): apparmor="STATUS" operation="profile_load" parent=389 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=396 comm="apparmor_parser"
type=1400 audit(1383829274.945:5): apparmor="STATUS" operation="profile_replace" parent=389 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=396 comm="apparmor_parser"
type=1400 audit(1383829274.945:6): apparmor="STATUS" operation="profile_replace" parent=389 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=396 comm="apparmor_parser"
type=1400 audit(1383829274.945:7): apparmor="STATUS" operation="profile_replace" parent=389 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=396 comm="apparmor_parser"
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
microcode: CPU0: patch_level=0x00000000
microcode: CPU0: new patch_level=0x06000822
microcode: CPU1: patch_level=0x00000000
microcode: CPU2: patch_level=0x00000000
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: OHCI PCI host controller
usb usb10: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
usb usb10: SerialNumber: 0000:00:12.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 11
ohci-pci 0000:00:13.0: irq 20, io mem 0xfe608000
microcode: CPU2: new patch_level=0x06000822
microcode: CPU3: patch_level=0x00000000
microcode: CPU4: patch_level=0x00000000
microcode: CPU4: new patch_level=0x06000822
microcode: CPU5: patch_level=0x00000000
microcode: CPU6: patch_level=0x00000000
microcode: CPU6: new patch_level=0x06000822
microcode: CPU7: patch_level=0x00000000
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input2
asus_wmi: Disabling ACPI video driver
usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: OHCI PCI host controller
usb usb11: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
usb usb11: SerialNumber: 0000:00:13.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 12
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe606000
usb usb12: New USB device found, idVendor=1d6b, idProduct=0001
usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb12: Product: OHCI PCI host controller
usb usb12: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
usb usb12: SerialNumber: 0000:00:14.5
hub 12-0:1.0: USB hub found
hub 12-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 13
ohci-pci 0000:00:16.0: irq 22, io mem 0xfe605000
usb usb13: New USB device found, idVendor=1d6b, idProduct=0001
usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb13: Product: OHCI PCI host controller
usb usb13: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
usb usb13: SerialNumber: 0000:00:16.0
hub 13-0:1.0: USB hub found
hub 13-0:1.0: 4 ports detected
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
hda-intel 0000:00:14.2: Using LPIB position fix
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90010e84b00). heartbeat=60 sec (nowayout=0)
hda-intel 0000:00:14.2: Enable sync_write for stable communication
SKU: Nid=0x0 sku_cfg=0x0000846b
SKU: port_connectivity=0x0
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000000
SKU: customization=0x00000000
SKU: external_amp=0x5
SKU: platform_type=0x0
SKU: swap=0x1
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: Enabling init ASM_ID=0x846b CODEC_ID=10ec0889
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
usb 10-1: new low-speed USB device number 2 using ohci-pci
Switched to clocksource tsc
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
usb 10-1: New USB device found, idVendor=04f2, idProduct=0833
usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 10-1: Product: USB Keyboard
usb 10-1: Manufacturer: CHICONY
init: failsafe main process (625) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (724) terminated with status 1
type=1400 audit(1383829275.615:8): apparmor="STATUS" operation="profile_load" parent=755 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=760 comm="apparmor_parser"
type=1400 audit(1383829275.615:9): apparmor="STATUS" operation="profile_load" parent=755 profile="unconfined" name="chromium_browser" pid=760 comm="apparmor_parser"
type=1400 audit(1383829275.615:10): apparmor="STATUS" operation="profile_replace" parent=755 profile="unconfined" name="chromium_browser" pid=760 comm="apparmor_parser"
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013
e1000e 0000:03:00.0: irq 97 for MSI/MSI-X
usb 10-2: new full-speed USB device number 3 using ohci-pci
e1000e 0000:03:00.0: irq 97 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 10-2: New USB device found, idVendor=1532, idProduct=0101
usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 10-2: Product: Razer Copperhead Laser Mouse
usb 10-2: Manufacturer: Razer
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb10/10-1/10-1:1.0/input/input15
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:12.0-1/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb10/10-1/10-1:1.1/input/input16
hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:12.0-1/input1
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb10/10-2/10-2:1.0/input/input17
hid-generic 0003:1532:0101.0003: input,hidraw2: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:12.0-2/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb10/10-2/10-2:1.1/input/input18
hid-generic 0003:1532:0101.0004: input,hidraw3: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:12.0-2/input1
usb 13-4: new full-speed USB device number 2 using ohci-pci
usb 13-4: New USB device found, idVendor=2433, idProduct=b111
usb 13-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 13-4: Product: 690LC
usb 13-4: Manufacturer: ASETEK
usb 13-4: SerialNumber: CCV_1.0
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
mtrr: type mismatch for f9000000,200000 old: write-back new: write-combining
mtrr: type mismatch for f9000000,100000 old: write-back new: write-combining
mtrr: type mismatch for f9000000,80000 old: write-back new: write-combining
mtrr: type mismatch for f9000000,40000 old: write-back new: write-combining
mtrr: type mismatch for f9000000,20000 old: write-back new: write-combining
mtrr: type mismatch for f9000000,10000 old: write-back new: write-combining
mtrr: type mismatch for f9000000,8000 old: write-back new: write-combining
mtrr: type mismatch for f9000000,4000 old: write-back new: write-combining
mtrr: type mismatch for f9000000,2000 old: write-back new: write-combining
mtrr: type mismatch for f9000000,1000 old: write-back new: write-combining
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011400000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
init: plymouth-splash main process (1054) terminated with status 1
nvidia 0000:01:00.0: irq 98 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NVRM: GPU at 0000:01:00: GPU-d4cbb77e-43de-69f0-f9dd-2941f9eebdce
NVRM: Xid (0000:01:00): 8, Channel 00000005